Most I-gates do not transmit Internet-sourced APRS position reports back out over RF. Why tie up the APRS-IS with information that provides no value? Using the Internet to put your location into the APRS-IS does not help local hams who do not have Internet connections.
APRS SOFTWARE FOR MAC SOFTWARE
Configure the software and hardware with the needed settings and try your new mode!Ĭlick to expand.To which I will ask, why? Why does the Internet need to know where you are via APRS? If you have a smart phone that includes a GPS receiver, the Internet already knows where you are.
APRS SOFTWARE FOR MAC PC
On the other extreme, you get a 2 meter radio (it can be a low end since you don't even need tone) and antenna, a Packet TNC (this can be hardware or software), a GPS unit that interfaces to your PC (optional for a base station since you can hard-code your location information), and APRS software for your PC (think Windows PC here for the largest selection, but if you hunt, you can find versions for Linux or Mac). Details of this operation should be in that. This isn't often used, but can be good while traveling. * I said "no tone", but there's an option that can be set in those pesky settings where you can set a tone for 100 Hz to allow a station to call on the APRS frequency and allow you to hear them without hearing the digital APRS signals. Also (depending on those settings) you can watch the display to see what APRS beacons your radio is picking up. Wait a bit and check Google Maps APRS for your station (you'll need to search for your call as you entered it into the settings) to find your station (note: you must be in range of an iGate station for your information to appear, but in most areas with significant population there are several). pdf), tune your radio to 144.39 MHz (simplex, no tone*), set the radio for APRS12 as the TNC option, wait for the GPS indicator on your control head to start flashing (indicating it has a good signal from the GPS satellites) and your radio should start beaconing (this may depend on those APRS specific settings as to if and how often to automatically beacon). You unpack the radio, connect the pieces together (base, head, and microphone), connect a dual-band VHF/UHF antenna, connect a 12v DC power supply with at least 10 amp continuous supply (often that will indicate one rated for at least 15 amps), make a few menu settings (like your call sign, and a few APRS specific settings detailed in the. pdf, I'll use their radio as my example) is the Kenwood TM-D710GA. One example (there are others but since W9BU posted the Kenwood. The easiest way is to purchase a radio with build-in APRS (especially those with built-in GPS). There are several routes to operate APRS on the ham bands and like many things, the easy way probably costs the most and the harder ways probably cost the least. Click to expand.This -> APRS: Automatic Packet Reporting System <- would be a good place to start.
0 kommentar(er)
